PLUG

[align=center][/align]

Idade: 16+
Peças: 2704
Preço (DE): 299.99€
Disponibilidade: a partir de 1 de Junho de 2016, em http://shop.LEGO.com, Lojas LEGO® ou via telefone

Peço desculpa por estar em inglês, mas o texto é demasiado longo para estar a traduzir tudo à mão...

---

Discover the iconic Porsche 911 GT3 RS!

Experience the iconic Porsche 911 GT3 RS with this authentic LEGO® Technic replica. Inside the box you’ll discover a special collector’s book chronicling the history of LEGO Technic and Porsche GT cars, together with 4 original-design rims bearing the RS emblem. The sets of elements are boxed, and the building sequence gives an insight into the real-life vehicle’s assembly process. The model features detailed, orange bodywork, red suspension springs, detailed headlights, taillights, brake calipers and rims with low-profile tires. The accessible cockpit features a detailed dashboard, working gearbox, steering wheel with gearshift paddles, racing seats and a glove compartment containing a unique serial number. Functions include opening doors and hood with storage compartment and suitcase, and an opening rear lid that houses a detailed flat 6 engine with moving pistons. This 1:8 scale model has been designed to provide an immersive and rewarding building experience.• Features authentically designed aerodynamic bodywork, adjustable rear spoiler, headlights and taillights, red suspension springs, original-design rims with RS emblem, detailed brake calipers, low-profile tires, working gearbox, working steering wheel with gearshift paddles, detailed seating, glove compartment with unique model serial number, opening doors, opening hood containing a suitcase, and an opening rear lid with detailed flat 6 engine.
• Includes a collection of authentic stickers.
• Check out the orange color scheme.
• Open the doors to access the detailed cockpit.
• Lift the rear lid to access the detailed flat 6 engine with moving pistons.
• Open the glove compartment to reveal the unique serial number.
• Delivered in luxurious box packaging.
• Includes a special full-color collector’s book including the history of LEGO® Technic and Porsche GT cars, plus comprehensive building instructions.
• This LEGO® Technic model is designed to provide an immersive and rewarding building experience.
• This set includes over 2,700 pieces.
• This set offers an age-appropriate building experience for ages 16+.
• Porsche 911 GT3 RS measures over 6” (17cm) high, 22” (57cm) long and 9” (25cm) wide.

---

Press Release:

The LEGO Technic Porsche 911 GT3 RS: the art of engineering and design in 2,704 elements
One of the latest models in the legendary 911 family, the Porsche 911 GT3 RS, is appearing as a detailed LEGO Technic model. The exclusive
LEGO set of the exceptional sports car, which has been developed in close conjunction with Porsche AG, will initially be available at shop.LEGO.com from June 1st, 2016, as well as in the 13 LEGO stores throughout Germany and Austria. It will be available in other stores from August 1st, 2016.

Munich, April 25, 2016. Like every sports car with the Porsche emblem on the hood, the LEGO version of the Porsche 911 GT3 RS also combines design, performance, and functionality. Still concealed in black-and-white foil as a mystery model at the Nuremberg toy fair late January, the color of the characteristic bodywork has now been revealed and shines in bright orange. Thus, it corresponds to the special coating of the original sports car in lava orange authentically. The model, which has 2,704 elements, also delights the beholder with sleek, aerodynamic lines and an adjustable rear spoiler. Besides many authentic features, the packaging and accessories that come with this complex LEGO Technic model also contribute to a building experience rich in variety: among other things, the box contains a comprehensive collector’s book with exclusive background information on the development of the model. Furthermore, the elements of the individual assembly groups are packed in separate boxes for the first time and, together with the detailed instructions, provide an insight into the assembly process of the actual vehicle.

The LEGO Technic Porsche 911 GT3 RS combines design and functionality
According to Ferry Porsche, driving enjoyment is not created by comfort –quite the opposite is the case. Consequently, the LEGO model also features a few rough edges that give it identity and character, just like the powerful original on which it is based: the authentically recreated bodywork is convincingly realistic with its characteristically low and sloping design, the large cooling air intakes at the front, the surface contouring of its roof and compartment lid, the unique front wheel arch air outlets of the lightweight carbon fenders and the striking rear wings.

Both the performance and the sportiness of the original have been realistically reproduced in various technical features on the LEGO model. One particular highlight is the fully functional Porsche double-clutch transmission with four gears and gearshift paddles on the steering wheel. But all technically minded LEGO fans will especially love building and playing with the six-cylinder boxer engine with moving pistons underneath the rear lid.

In addition to the technical features, the interior of the model is also authentic and close to the original. A detailed dashboard, a steering wheel with gearshift paddles, racing seats, and a glove compartment concealing a unique serial number can all be found in the easily accessible cockpit. Using this serial number, additional exclusive content can also be released from June 1st 2016 by following www.lego.com/technic.

Further product highlights on the LEGO Technic Porsche 911 GT3 RS for master builders aged 16 and over include:

• Opening doors and hood
• A trunk with case
• Authentic stickers to give the model the faithful final touch
• Rims in the original design with RS emblem

The LEGO Technic Porsche 911 GT3 RS is a 1:10 scale model and is 17 cm high, 57 cm long, and 25 cm wide.

The LEGO Technic Porsche 911 GT3 RS will initially be available at shop.LEGO.com from June 1st, 2016, as well as in the 13 LEGO stores throughout Germany and Austria. It will be available in other stores from August 1st, 2016.

---

Mais imagens:

[align=center] [/align]

---

Vídeo de apresentação:

[align=center][/align]

Entrevista aos designers do 42056 - Porsche 911 GT3 RS

[align=center]



[center]Andrew Woodman[/align]
[align=center]Uwe Wabra[/align]


[/center]

The designers of the LEGO Technic Porsche 911 GT3 RS Andrew Woodman and Uwe Wabra are talking about their dream project – from the idea to the complete model.
What was the idea behind this project?

Andrew Woodman, Senior Design Manager, LEGO Technic:
As a lover of design and high-performance cars, it was a dream to make the Porsche 911 our first model. When we started to collect ideas for this new LEGO Technic model, we realized that we wanted to create more than just a great building experience. It should be all over special. We knew that we needed a partner with the perfect vehicle that was both highly desirable and a true icon. So we reached out to Porsche.

How did the cooperation with Porsche run?

Andrew Woodman, Senior Design Manager, LEGO Technic:
The cooperation with Porsche was fantastic. The employees are incredibly passionate for the Porsche brand and showed huge interest in our LEGO Technic model.
From our very first meeting it was clear that Porsche shared the same passion for the vision of this concept and together we decided upon using the current 911 GT3 RS as the first vehicle in this LEGO Technic series.

How much time did the whole process take and what were the particular development steps?

Andrew Woodman, Senior Design Manager, LEGO Technic:
The whole process took almost two ages: From the development of initial design ideas concerning the concept in winter 2013 to the final approval of the model by Porsche in fall 2015.

Uwe Wabra, Senior Designer, LEGO Technic:
When we started our initial drafts in 2013, the Porsche 911 GT3 RS project remained top secret. Therefore I had to build the first LEGO version using photos of the camouflaged prototype of the original from the internet. The first LEGO prototype was ready in a matter of weeks.

Andrew Woodman, Senior Design Manager, LEGO Technic:
We presented the result of the first model to the design team of the 911 GT3 RS at Porsche and discussed the basic technical functionalities as well as the shape of the body. On the basis of this feedback we designed the next model and simultaneously started with the development of the wheels rims which are an important part of the legendary design of the car. Afterwards we visited the Porsche Development Center in Weissach as well as the Porsche GT workshop area. During intensive working phases we worked out the elements and details of the car and perfected them. The final step was the approval by Porsche.

Did you experience a special moment during the development phase?

Andrew Woodman, Senior Design Manager, LEGO Technic:
During our visit at the Porsche GT workshop area we could see a preproduction 911 GT3 RS complete and finished in lava orange. This was the first time we saw the car in color – all the others had been black which made it difficult to see the proportions and details of the car.

How many persons were involved in the development process?

Andrew Woodman, Senior Design Manager, LEGO Technic:
Several persons participated in the development of this model: Among others, a graphic designer started working on the required decorations and stickers. In the meantime model designers worked further on the styling and on the development of particular components, for example the gearbox.

What were the challenges during the development of the LEGO Technic Porsche 911 GT3 RS?

Andrew Woodman, Senior Design Manager, LEGO Technic:
One of the biggest challenges for us laid in designing an element that works on the 911 GT3 RS, but also in general with all others LEGO Technic elements. Furthermore something that could work in our system for years to come.

Uwe Wabra, Senior Designer, LEGO Technic:
It was important to integrate as many of the advanced technical functionalities from the real 911 GT3 RS as we could. The steering and suspension were difficult enough, but our biggest challenge was the creation of the functioning double-clutch transmission with gearshift paddles.

About the designers:
Andrew Woodman is Senior Design Manager at LEGO Technic and working for the LEGO Group since 2003. The design lover has a passion for all kinds of vehicles, yachts and architecture. He passes on this passion and knowledge for design by lecturing at colleges hopefully inspiring and motivating others to become interested in his profession.
Uwe Wabra is Senior Designer in the LEGO Technic department. He has been working for the LEGO Group for already ten years. Uwe has a huge passion for all things automotive as a glance in his garage reveals. It really is an eclectic collection of cars, bikes and trucks, consisting of originals as well as models, which is spread all over his house.

---

Designer Video:

[align=center][/align]

---

Mini-biografias dos designers:

Andy Woodman

Current position: Senior Design Manager LEGO Technic
- Andy Woodman, age 44, married with 1 daughter aged 4 who already shares her dad’s passion for speed and loves to ride around on her own Ducati
- Lives in a forest area of Denmark in a house they designed and built themselves
- Has a first class Hon’s degree in Industrial Design and Masters degree in Vehicle Design from the Royal College of Art, London
- Work experience includes RLE international, DAF Trucks Holland, Emap and Lego System A/S where he has worked since 2003
- Has a passion and interest for all forms of design especially Architecture, Vehicles and Yachts. Passes on this passion and knowledge for design by lecturing at local colleges, hopefully inspiring others to be interested in perusing a design career
- Loves cars and all things automotive, especially racing his rally prepared Porsche 911. Loves road trips and exploring new places, hates plane travel, not flying, just everything associated with it. Still looking for the ultimate family car, to use on a grand tour with the family and explore new places

Uwe Wabra

Current position: Senior Designer in the LEGO Technic department
- Uwe Wabra, has worked at the LEGO Group since 1996
- Lives close to Billund in a home he has renovated over a number of years and is constantly evolving to accommodate his fantastic collection of Auto Memorabilia
- Originally trained as a chef at a prestigious Danish Hotel before turning to his other passion, carpentry. Then in 1996 he got the opportunity to reignite his childhood passion for LEGO Building by accepting a position with the LEGO Group in the LEGO Technic department
- Since then he has had many roles designing for other departments in the company but his passion is for the LEGO Technic models and is very happy to be back working with the LEGO Technic team
- Has a passion for all things automotive – just take a quick look in his garage or at his model collection, which is spread all over his garage and house. It really is an eclectic collection of cars, bikes and trucks
- His passion is for classic vehicles and of course, Porsche has a strong past. He has always had a Beetle and now that he has worked with Porsche, he really wants a 356

Como eu desconfiava, aqueles autocolantes todos catitas às ondinhas que tínhamos visto em Nuremberg não iriam acabar no modelo final... se bem que esperava um esquema de cores menos homogéneo que este.

O set está muita giro mas um bocado carote.
Ao principio ainda pensei adquiri-lo mas provavelmente vou guardar os 300€ para outras coisas 

300€ por um set sem um único motor?!?
Põe carote nisso.

Realmente 300€ é uma brutalidade! Há a licença e os extras (o calhamaço e caixa XPTO), mas mesmo assim é puxado...

Para um Technic, o carro até que não está muito mal - e não, não estou a ser sarcástico. Para mim, este é um dos melhores sets Technic que a LEGO já fez.

Mas, pessoalmente, continuo a preferir o estilo mais "composto" de um 10248 (e que ainda por cima  consegue ser "um bocadinho" mais barato...  ).

Enfim, são gostos!...

Lá vou ter que comprar lego com buracos 

Quando vi o designer vídeo pensei... É agora que eu que nunca na vida comprei um Lego Technic vou perder a virgindade!!!

Quando vi preço pensei... que se fecunda, vou comprar na mesma!!!

Resta saber se sei montar aquelas geringonças technicas todas!

[quote="BCanilho"]
Resta saber se sei montar aquelas geringonças technicas todas!
[/quote]

É só seguir as instruções... 

Em relação ao preço, o Sariel comparou recentemente o PPP deste set com os de outros Technic, e até nem é assim tão alto. O problema é ter tantas peças...

Para LEGO com buracos tem realmente muito bom aspecto!
Mesmo assim acho que gostava mais da versão preliminar este laranja não me convence.
É realmente um bocado caro... será fácil colocar motores naquilo?

Ou era laranja ou era branco, que são as cores do modelo real. Ainda bem que não foi branco que branco suja-se muito.

Muito catita .....mas carote..................

Pode sempre aparecer nos hipers do amigo Belmiro ....lol.

abraço

[quote="Jnunes"]
Muito catita .....mas carote..................

Pode sempre aparecer nos hipers do amigo Belmiro ....lol.

abraço
[/quote]

Vai sonhando ...